Viewing the Service Category

Our “Studio” in their studio @ Parson’s New School

June 20, 2012 at 12:11 am  |   News, Service, Systems, Travel

Parson’s New School opens the doors of automation to many departments with the fast, light, and affordable Studio STx-72 plotter/cutter.

Read

PM32 Setup

May 30, 2012 at 10:08 pm  |   Service

Plotmaster32 (PM32) was in final release in 2002-2003.  It was the plotmaster/control software version from 1998-2003.  Registered legacy users can download PM32 here:  https://carlsondesign.com/software/updates-and-downloads/pm32 The following are detailed instructions for running PM32 on a Windows XP, 32bit PC. Use the PM32 Installer, making sure to install in c:\nest.  Then paste the contents of the Update […]

Read

Super Accurate Plotting

March 27, 2012 at 9:57 pm  |   Service

There are a few necessary steps to make sure your plot files are extremely accurate. You will need PMU version 4.0.758 or higher for the following procedure.  For version history, see the changelog. First, you will want to carefully align your blade.  You will visually try to get it as close as possible to do […]

Read

Check Signal Cable

August 12, 2011 at 9:20 pm  |   Service

If you are experiencing skips in your plotters movement, or intermittent failure of the pen or cutter, you may have a signal cable that has a faulty or broken connection. To check your cable, do the following: Unplug both ends, and put both ends in a vice, or something to keep them stationary while you […]

Read