Viewing the Service Category
Parallel Port EPP Mode
June 22, 2012 at 6:28 pm | Service, Software, Systems, Uncategorized
To run your plotter using PM32 or PMXPv, you must have a built-in parallel port, and you must configure the parallel port for EPP mode. If you do not have a built-in parallel port, you will need to use a different computer. If you need to purchase a computer with a built-in parallel port, please [...]
ReadOur “Studio” in their studio @ Parson’s New School
June 20, 2012 at 12:11 am | News, Service, Systems, Travel
Parson’s New School opens the doors of automation to many departments with the fast, light, and affordable Studio STx-72 plotter/cutter.
ReadPM32 Setup
May 30, 2012 at 10:08 pm | Service
Plotmaster32 (PM32) was in final release in 2002-2003. It was the plotmaster/control software version from 1998-2003. Registered legacy users can download PM32 here: http://carlsondesign.com/software/updates-and-downloads/pm32 The following are detailed instructions for running PM32 on a Windows XP, 32bit PC. Use the PM32 Installer, making sure to install in c:\nest. Then paste the contents of the Update [...]
ReadSuper Accurate Plotting
March 27, 2012 at 9:57 pm | Service
There are a few necessary steps to make sure your plot files are extremely accurate. You will need PMU version 4.0.758 or higher for the following procedure. For version history, see the changelog. First, you will want to carefully align your blade. You will visually try to get it as close as possible to do [...]
Read